ICT-Dp60-L05-K2 0,21
Interface Materials/ Phase Change Materials
The ICT DP60 series is a high-performance, electrically insulating, heat conductive, solvent-and silicone-free hi-performance phase change material that uses a Kapton ® MT-polyimidfilm as a thermally conductive substrate carrier.
The product group comprises a total of four units:
ICT-Dp60-L05-K1|ICT-Dp60-L05-K1,5 | ICT-Dp60-L05-K2|ICT-Dp60-L05-K3
General Properties | Unit | ICT-Dp60-L05-K2 |
---|---|---|
Phase-change material | - | Silicone-free paraffine wax |
Color | - | Matt Orange |
Material gauge with coating (µ) | µm | 76 |
UL flammability rating | UL | UL 94 V0 |
Layer thickness of wax coating | µm | 12,50 |
Breaking strength (kN/m) | (kN/m) | 300 |
Tensile strength | MPa | 124 |
Dielectric strength | kV (AC) | 7700 |
Volume resistivity | Ω/m | 1,00 x 10^12 |
Thermal conductivity | W/m*K | 0,45 W/m*K |
Thermal resistance (inch² / 645,16mm²) | K/W | 0,21 |
Phase-change temperature | °C | 60 °C |
Operating temperature | °C | from -60 °C to 140 °C |
Storage temperature (max) | °C | 60 °C |
Properties
- Silicone free
- Guaranteed Layer Thickness
- Cost-effective drop-in-place solution
- Fully customer-centered for specific requirements
- Low Thermal Impedance
- Excellent mechanical and electrical insulating properties
- Solutions for many types of surfaces
- Excellent replacement for thermal paste
- Only low tightening torque required
- Fast, clean and process-safe pre-assembly by partial adhesive strips on the outside areas of the Tims
- Material can be interchangeable without surface treatment
- Easy cleaning by Isopropyl alcohol
- Non-combustible according to UL 94 V0 Kapton MT UL registration (file.-No. E39505 du Pont)
Delivery Forms
- Other coating thicknesses can also be requested on request
- Roll lengths and widths available according to customer requirements (from 12 mm width, tol: +/-0.5 cm)
- In roll form, dimensions according to customer specification (drop & place) with or without partial adhensive liner both variants available on reel, also available unilaterally
- Fast, clean and process-safe pre-assembly by partial adhesive strips on the outside areas of the Tims
- Standard sheet sizes-sheets | Standard DIN A4/30cm x 24inch or 39 cm x 60 cm (tol: +/-0.5 cm)
- In blanks and shapes according to customer specification sheet/roll/loose or on carrier (Kisscut)
- Depending on customer requirements
* The unilaterally applied adhensive liner layer (acrylic adhesive layer) increases the Rth value by up to 0.05 ° K/W
No warranties or liabilities can be taken for the displayed information.